Separation of Hydrocarbon Mixtures in the Microgram Range by Inclusion in a Urea-packed Mini Column

Abstract

The use of classical urea inclusion techniques for the separation of straight chain hydrocarbons from branched and cyclic compounds is satisfactory when applied to mixtures in the milligram to gram ranges, but leads to low separation efficiencies when quantities in the microgram to milligram range are involved. In this study, a modified inclusion technique using an urea-packed milli-bore column and a catalytic eluent is described. Examples of its use for the separation of mixtures of linear and cyclic hydrocarbons from 30μg up to a few milligrams are given. The versatility of this technique for the analyses of low amounts of environmental samples is described, and an application to the hydrocarbon fraction of surface sediment from lake Leman (Switzerland) is presented.     

Fabrication of single‐walled carbon nanohorns incorporated a monolithic column for capillary electrochromatography

Single‐walled carbon nanohorns have received great interest for their unique properties and diverse potential applications. Herein, we demonstrated the feasibility of single‐walled carbon nanohorns incorporated poly(styrene‐divinylbenzene) monolith as the stationary phase for capillary electrochromatography, which were prepared by one‐step in situ copolymerization. Single‐walled carbon nanohorns were dispersed in styrene to give a stable and homogeneous suspension. The monolithic column gave effective separation for a wide range of aromatic compounds, which was based on hydrophobicity and π–π electrostatic stacking of single‐walled carbon nanohorns. The precisions of migration time and peak area varied in the ranges of 1.4–1.9% for intraday trials and 1.7–3.5% for interday trials, and 3.2–6.7% for intraday trials and 4.1–7.4% for interday trials, and 3.6–7.2% for inter‐column trials and 5.2–21.3% for inter‐column trials, respectively, indicating the good reproducibility of single‐walled carbon nanohorns embedded monolithic columns.     

Radiation attenuation and nuclear properties of high density concrete made with steel aggregates

Abstract

The fast neutron and gamma ray spectra measured behind different thickness of steel scrap concrete with density of 4 g/cm³ have been studied. The mix proportions by weight of this type of concrete were 1 cement: 6.89 steel scrap: 2.9 sand and 0.5 Water. Comparison with a standard ordinary concrete of density 2.3 g/cm³ have been carried out. The measurements were made using a collimated beam of both gamma rays and neutrons emitted from one of the horizontal channel of the Egyptian Research Reactor-1. A fast neutron and gamma ray spectrometer with a stilbene crystal was used to measure the spectra of fast neutrons and gamma rays. Pulse shape discrimination using the zero cross over technique was used to separate the photon pulses from the electron pulses. The equation due to Schmidt has been modified and applied for determining the neutron effective removal cross sections (～_R) for steel scrap, ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes. This equation gives results which are in good agreement with the measured values. The derived empirical equation in a previous work to calculate the neutron integral flux behind different thicknesses of different types of concretes, gives good results for steel scrap concrete under investigation comparing with the corresponding experimental data. Total neutron macroscopic cross sections, linear attenuation coefficients for gamma rays and the half-value layers for both radiations at different energies have been obtained for steel scrap concrete and comparing with the corresponding values of ordinary concrete. The results show that steel scrap concrete is better than ordinary, hematite–serpentine, ilmenite–limonite and ilmenite concretes from the radiation shielding point of view.     

Flexural reinforcement of concrete floor slabs by carbon fiber textiles

The effect of carbon fiber textile for flexural reinforcement to deteriorated reinforced concrete floor slab is tested in laboratory by cutting out six specimens from existing structure aged more than 70 years. The repair method between concrete and carbon fiber textile is used as experimental parameter. From the test results, deformation, bond characteristic of carbon fiber textile and the applicability of carbon fiber textiles to flexural reinforcement of floor slabs are discussed.     

Mechanically strong and stiff supramolecular polymers enabled by fiber reinforced long-chain alkane matrix

Fiber-reinforced-concrete (FRC) mechanism refers short discrete fibers that are uniformly distributed and randomly oriented, which offers an effective way to improve the mechanical performance of concrete. In the design of supramolecular polymers, an analogous concept of FRC appears to have been considered very rarely-although fibrous structure has been frequently observed/generated during the supramolecular polymerization. In this work, we apply the alkane thermosets, octadecane (C₁₈H₃₈) and tetracosane (C₂₄H₅₀), taking the role of “concrete”, and the low-molecular-weight monomer with long alkyl chains as the essential “fiber” component, to fabricate the “fiber reinforced supramolecular polymer”. Very much like FRC mechanism in material science, the resulting fiber reinforced supramolecular polymer thus exhibit unusually high mechanical strength and stiffness, which is unprecedented in the conventional supramolecular strategy.     

D3h‐Symmetric Porphyrin‐Based Rigid Macrocyclic Ligands for Multicofacial Multinuclear Complexes in a One‐Nanometer‐Sized Cavity

The one‐step synthesis of D_3h‐symmetric cyclic porphyrin trimers 1 composed of three 2,2′‐[4,4′‐bis(methoxycarbonyl)]bipyridyl moieties and three porphyrinatozinc moieties was achieved from a nickel‐mediated reductive coupling of meso‐5,15‐bis(6‐chloro‐4‐methoxycarbonylpyrid‐2‐yl)porphyrinatozinc. Although cyclic trimers 1 were obtained as a mixture that included other cyclic and acyclic porphyrin oligomers, an extremely specific separation was observed only for cyclic trimers 1 when using columns of silica gel modified with pyrenylethyl, cyanopropyl, and other groups. Structural analysis of cyclic trimers 1 was carried out by means of NMR spectroscopy and X‐ray crystallography. Treatment of an η³‐allylpalladium complex with a cyclic trimer gave a tris(palladium) complex containing three η³‐allylpalladium groups inside the space, which indicated that the bipyridyl moieties inside the ring could work as bidentate metalloligands.     

A column‐switching HPLC‐MS/MS method for mucopolysaccharidosis type I analysis in a multiplex assay for the simultaneous newborn screening of six lysosomal storage disorders

Lysosomal storage disorders comprise a group of rare genetic diseases in which a deficit of specific hydrolases leads to the storage of undegraded substrates in lysosomes. Impaired enzyme activities can be assessed by MS/MS quantification of the reaction products obtained after incubation with specific substrates. In this study, a column‐switching HPLC‐MS/MS method for multiplex screening in dried blood spot of the lysosomal enzymes activities was developed. Mucopolysaccharidosis type I, Fabry, Gaucher, Krabbe, Niemann–Pick A/B and Pompe diseases were simultaneously assayed. Dried blood spots were incubated with substrates and internal standards; thereafter, supernatants were collected with minor manipulations. Samples were injected, trapped into an online perfusion column and, by a six‐port valve, switched online through the C₁₈ analytical column to perform separation of metabolites followed by MS/MS analysis. A total of 1136 de‐identified newborn screening samples were analyzed to determine references for enzymes activity values. As positive controls, we analyzed dried blood spots from three patients with Pompe, one with Fabry, one with Krabbe disease and two with MPS I, and in all cases the enzyme activities were below the cutoff values measured for newborns, except for an MPS I patient after successful hematopoietic stem cell transplantation. Copyright © 2014 John Wiley & Sons, Ltd.     

Diseño automático de tableros óptimos de puentes de carretera de vigas artesa prefabricadas mediante algoritmos meméticos híbridos

This paper deals with the minimum cost automatic design of precast bridge decks made of U-beams and an upper slab. It uses a hybrid memetic algorithm that combines the population search of solutions by genetic algorithms and a search by variable neighborhood. This algorithm is applied to a bridge made of two isostatic U-beams of 20-40 m of span and a width of 12 m. This example has 40 discrete variables. The evaluation module takes into account the service and ultimate limit states usually considered for these structures, i.e. flexure, shear, torsion, cracking, deflections, etc. The use of the memetic algorithm requires its previous calibration. Each of the heuristics is run 12 times, obtaining information about the minimum and average values, as well as the scatter. The parametric study showed a good correlation for the cost, the number of strands and the steel and concrete quantities with the span length. Savings have been found between 8 and 50% compared to other structures really executed. The presented procedure allows the practical application to the real design and its adaptation to the precast process.     

Sol-Gel processing of silica nanoparticles and their applications

Recently, silica nanoparticles (SNPs) have drawn widespread attention due to their applications in many emerging areas because of their tailorable morphology. During the last decade, remarkable efforts have been made on the investigations for novel processing methodologies to prepare SNPs, resulting in better control of the size, shape, porosity and significant improvements in the physio-chemical properties. A number of techniques available for preparing SNPs namely, flame spray pyrolysis, chemical vapour deposition, micro-emulsion, ball milling, sol-gel etc. have resulted, a number of publications. Among these, preparation by sol-gel has been the focus of research as the synthesis is straightforward, scalable and controllable. Therefore, this review focuses on the recent progress in the field of synthesis of SNPs exhibiting ordered mesoporous structure, their distribution pattern, morphological attributes and applications. The mesoporous silica nanoparticles (MSNPs) with good dispersion, varying morphology, narrow size distribution and homogeneous porous structure have been successfully prepared using organic and inorganic templates. The soft template assisted synthesis using surfactants for obtaining desirable shapes, pores, morphology and mechanisms proposed has been reviewed. Apart from single template, double and mixed surfactants, electrolytes, polymers etc. as templates have also been intensively discussed. The influence of reaction conditions such as temperature, pH, concentration of reagents, drying techniques, solvents, precursor, aging time etc. have also been deliberated. These MSNPs are suitable for a variety of applications viz., in the drug delivery systems, high performance liquid chromatography (HPLC), biosensors, cosmetics as well as construction materials. The applications of these SNPs have also been briefly summarized.     

Supramolecular separation mechanism of pentafluorophenyl column using ibuprofen and omeprazole as markers: LC‐MS and simulation study

The pentafluorophenyl (PFP) column is emerging as a new advancement in separation science to analyze a wide range of analytes and, thus, its separation mechanism at supramolecular level is significant. We developed a mechanism for the separation of ibuprofen and omeprazole using different combinations (ranging from 50:50 to 60:40) of water–acetonitrile containing 0.1% formic acid as the mobile phase. The column used was Waters Acquity UPLC HSS PFP (75 × 2.1 mm, 1.8 μm). The reverse order of elution was observed in different combinations of the mobile phases. The docking study indicated hydrogen bonding between ibuprofen and PFP stationary phase (binding energy was −11.30 kJ/mol). Separation at PFP stationary phase is controlled by hydrogen bonding along with π–π interactions. This stationary phase may be used to analyze both aromatic and aliphatic analytes. The developed mechanism will be useful to separate various analytes by considering the possible interactions, leading to saving of energy, time and money. In addition, this work will be highly useful in preparative chromatography where separation is the major problem at a large scale. Moreover, the developed LC‐MS‐QTOF method may be used to analyze ibuprofen and omeprazole in an unknown sample owing to the low value of detection limits.